Yoosee WiFi Camera Setup

1.Mobile phone software download:
1) IOS user can download and install Yoosee in Apple official shop
2) Android user can enter website: http://www.yooseecamera.com, download and install Yoosee
3) Android version and IOS version can scan the QR code to download the software directly

2.Mobile phone ID register
Note：first open the “Yoosee” software ，user need register one ID as the following:
1) choose the right under “register” to enter
2) choose“mobile phone register”or“email register”，click “next”
3) input email box and password,click “next”( the email register no need verification code ,register it directly; the mobile phone register,the verification code will be sent to the phone by message.)
4) if register successfully,it will show “congratulations,register successfully”,and the system will distribute one ID to you automatically at the same time.please remember this ID,it can be used as the user name ,click “confirm”,input the password you set just now again,then you can log in normally.

3.Mobile phone network connection
There are two ways for connecting device to network：
1) Wired connection：after the camera power on,connect one end of the cable to the camera ,the other end to the router LAN port(please be sure the router open the DHCP function) ,the network light will be normally on after connection successfully.
2) WIFI connection：the users can follow the below ways if they wants to start using WIFI to get connection with the camera when the camera is wired connection：
A.please add the devise to the Yoosee device list： “Add device”,please view the fifth part for the detail steps.
B.open Yoosee software，１.choose“device”，click device name,choose “settings”；２.choose “network settings”３.（please don’t choose “WIFI” directly at the moment ）the following will search all of the WIFI signal near it automatically,choose your WIFI ID ４.input WIFI password,open wifi successfully.

C.set WIFI by “intelligent online”：【details refer to 4.add device on mobile phone》2）】

4.Add device on mobile phone
How to add the device to device list:
1）.In the device list interface of the“Yoosee”software，when the camera is in network and the phone is in the same WIFI,both of them are in one LAN,the software will find all the devices automatically,and only need choose ,add and set the access password is ok.
2）.intelligent online：open the Yoosee software,click “Device”,choose the“ +”button ,choose “intelligent online”,click next and then choose the WIFI and WIFI password you need,click the “next” again ,connect the device.
3）.Add device manually：in the device interface of the Yoosee software,click the “+” ,input ID and password is ok.

5.The device monitor of mobile phone
1）.contact person：click the device icon that has been added in device list to entry the monitor mode .